nibot ([personal profile] nibot) wrote2008-08-04 05:01 am
Entry tags:

car fixing

So I still have this 1992 VW GTI in Pasadena, currently inoperative and collecting dropped citrus fruit in the driveway. I maintain some illusions about fixing it, though I have to admit that the Click & Clack "1-800-Take My Car Please" ads are sounding more and more appealing.

The showstopper right now is the brakes. The brake pedal goes to the floor—I'm pretty sure the master cylinder is busted. But for the life of me I can't get some of the brake lines unbolted from the master cylinder. They are rusted together. Then again, I haven't tried anything more exotic than penetrating oil and a flare nut wrench.

One website says:
Q: How do you remove rusted brake line connectors from master and wheel cylinders?

A: Sometimes it is impossible to remove them even with vise grip pliers. You may have to cut them off and replace the whole brake system lines and all.
great.

Re: Heat?

[identity profile] nibot.livejournal.com 2008-08-13 10:46 pm (UTC)(link)
I got a butane pencil torch... but then was able to get the fastener to move with just vise-grips and oil. Got the old master cylinder off with no problem after that!

Though when I got here, I found the car no longer starting. It just goes click-click-click-click... is that just low battery? I don't hear it try to turn over at all.

Re: Heat?

[identity profile] spencerfern.livejournal.com 2008-08-13 11:04 pm (UTC)(link)
Almost certainly the battery. The click is the starter solenoid. It has two jobs, act as a relay for power to the starter motor and push out the pinion in the starter motor to engage it with the flywheel.

As soon as it completes the circuit powering the motor, it sees load which your enfeebled battery can't handle and the current drops so low it can't even power the solenoid. Once the solenoid retracts, the load drops back to a low level, and it starts over again.

[identity profile] nibot.livejournal.com 2008-08-15 05:12 pm (UTC)(link)
Yup. Put a charger on it overnight and it started right up in the morning.

Still having some trouble with the master cylinder. Three of the brake lines attached easily enough, but the fourth is acting cross-threaded or something: it screws in a little bit, but then comes right out. )-: